MEP trades (mechanical, electrical, plumbing) working at height on housing schemes need fall protection that has often been designed for the general contractor's own trades and does not translate cleanly. The result is either MEP operatives working with inadequate protection, or MEP trades installing their own separate protection that duplicates or conflicts with what is already in place.
How MEP access needs differ from primary construction trades
The specific issue is that fall protection design typically flows from the primary construction trades. Scaffold for the bricklayer and roofer. Edge protection for the flat roof. Netting for the vertical works. Each is scoped and priced for the trade that primarily needs it. MEP trades arriving later or working in parallel are often not explicitly considered.
MEP-specific fall protection needs include access to plant rooms and equipment at height, particularly on roofs and in service ducts, work around openings for services penetrations, coordination with structural steelwork during MEP installation, and access for testing and commissioning that happens after main scaffold has been removed.
Red Safety Netting's engagement on multi-trade housing schemes includes the MEP interface as part of the initial fall protection design rather than as an afterthought. Where MEP operations will require access to specific areas at specific stages, the fall protection strategy accommodates them explicitly rather than requiring retrospective additions.
Designing fall protection to cover the MEP trades too
There is a specific issue around scaffold removal timing that MEP trades sometimes discover late. When scaffold comes down after the roof is complete, MEP operatives who still need access to plant on the roof or to elevated equipment discover that their access has disappeared. The correct answer is coordination at planning stage. The incorrect answer is scaffold re-erection or MEWP hire retrospectively.
The interaction with the design team matters. Where the M&E designer specifies plant locations without considering the fall protection implications, the resulting design produces access difficulties that fall protection has to solve at construction stage. Early conversation between the fall protection specialist and the M&E designer prevents these issues.
For principal contractors coordinating multi-trade sites, the MEP fall protection scope should be explicit in the fall protection contract rather than assumed to be included by default. Which MEP activities are covered. What access provisions are provided. When and how the MEP trades will be inducted into the fall protection systems.
Commissioning, documentation and QS implications
The commissioning stage produces specific fall protection challenges worth flagging. Commissioning happens late in the programme, often after primary scaffold has been removed. Commissioning engineers may need to work at heights on the roof, in service risers, or on external equipment. Where fall protection for commissioning has not been planned, the work either does not happen or happens unsafely.
There is a related issue around handover documentation to the M&E contractor. Where the fall protection systems have design capacity that supports MEP loading (mounting of transducers, temporary work platforms during commissioning), the documentation should confirm this. Where the design does not support MEP loading, the M&E contractor needs to know so they can plan alternative arrangements.
For QSs on housing schemes with substantial MEP scope, the fall protection line item should be checked for MEP inclusion specifically. A price that covers only the primary construction trades will produce variations or safety issues when MEP arrives. A price that includes MEP coordination up front is more accurate and safer.
Talk to Red Safety Netting
To discuss fall protection coordination between general contractor and MEP trades on your scheme, contact Red Safety Netting on 01223 890727 or email enquiries@theglobegroup.co.uk.



